packages/web/353/php_top/sync.php File Reference

Go to the source code of this file.

Functions
	_returnXML ($xml, $rslt=0)
Variables
default	__pad7__
	$trigger_parms = array()
	$sensor_clk = elphel_get_P_value(ELPHEL_CLK_SENSOR)
else	$trigger_parms ["TRIG_PERIOD"] = 0
	break
	break
	enabling FPGA trigger signals to propagate to the FPGA GPIO (not really needed here)
case	slave
	break
	disabling FPGA trigger signals (not really needed here)

---

Function Documentation

_returnXML	(	$	xml,
		$	rslt = 0
	)

*************************************************************************** ! FILE NAME : sync.php ! DESCRIPTION: sync boards detection /setup ! Copyright (C) 2008 Elphel, Inc ! -----------------------------------------------------------------------------** ! ! This program is free software: you can redistribute it and/or modify ! it under the terms of the GNU General Public License as published by ! the Free Software Foundation, either version 3 of the License, or ! (at your option) any later version. ! ! This program is distributed in the hope that it will be useful, ! but WITHOUT ANY WARRANTY; without even the implied warranty of ! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ! GNU General Public License for more details. ! ! You should have received a copy of the GNU General Public License ! along with this program. If not, see <http://www.gnu.org/licenses/>. ! -----------------------------------------------------------------------------** !

Log

sync.php,v

! Revision 1.1.1.1 2008/11/27 20:04:03 elphel ! ! ! Revision 1.6 2008/03/25 07:38:43 elphel ! just troubleshooting ! ! Revision 1.5 2008/03/22 04:43:03 elphel ! few minor changes ! ! Revision 1.4 2008/03/21 01:20:19 elphel ! forces to use "role=sync" if no board is detected (so malfunctioning board will cause an error) ! ! Revision 1.3 2008/03/21 01:10:34 elphel ! mode it work in "self" mode even if no sync board is detected. ! ! Revision 1.2 2008/03/20 22:33:23 elphel ! control fof inter-cameras synchronization using 10369, 10371 boards ! ! Revision 1.1 2008/03/17 17:44:39 elphel ! started sync.php to setup synchronization (10369/10371 boards) ! !

Definition at line 47 of file sync.php.

References $rslt, $sxml, $xml, exit, and header.

---

Variable Documentation

$sensor_clk = elphel_get_P_value(ELPHEL_CLK_SENSOR)

Definition at line 212 of file sync.php.

else $trigger_parms["TRIG_PERIOD"] = 0

Definition at line 219 of file sync.php.

$trigger_parms = array()

Definition at line 211 of file sync.php.

default __pad7__

Definition at line 205 of file sync.php.

break

disabling FPGA trigger signals (not really needed here)

Definition at line 242 of file sync.php.

break

enabling FPGA trigger signals to propagate to the FPGA GPIO (not really needed here)

Definition at line 237 of file sync.php.

break

Definition at line 230 of file sync.php.

case slave

Definition at line 240 of file sync.php.

Referenced by createDefaultConfig().

---