fpga/x359/test_scripts/sensors_init.php File Reference

Go to the source code of this file.

Functions
	send_i2c ($width, $bus, $a, $d, $raw=0)
	send_i2c_4 ($width, $bus, $a, $d, $raw=0)
	receive_i2c ($width, $bus, $a, $raw=0)
	receive_i2c_4 ($width, $bus, $a, $raw=0)
	dcm_reset ($width, $bus, $raw=0)
	sensor_init ($width, $bus, $channel, $init_pars, $raw=0)
Variables
	$width = 16
	$bus = 0
	$sphase = 0x0000007

---

Function Documentation

dcm_reset	(	$	width,
		$	bus,
		$	raw = 0
	)

Definition at line 91 of file sensors_init.php.

References $bus, $raw, $width, and send_i2c_4().

receive_i2c	(	$	width,
		$	bus,
		$	a,
		$	raw = 0
	)

Definition at line 63 of file sensors_init.php.

References $a, $bus, $data, $i2c, $v, $width, dev, and raw.

receive_i2c_4	(	$	width,
		$	bus,
		$	a,
		$	raw = 0
	)

Definition at line 75 of file sensors_init.php.

References $a, $bus, $data, $i2c, $v, $width, dev, raw, and SEEK_END.

send_i2c	(	$	width,
		$	bus,
		$	a,
		$	d,
		$	raw = 0
	)

*************************************************************************** ! FILE NAME : sensors_init.php ! DESCRIPTION: reads parameters from the sensor 1 and writes to other sensors ! Copyright (C) 2008 Elphel, Inc ! -----------------------------------------------------------------------------** ! ! This program is free software: you can redistribute it and/or modify ! it under the terms of the GNU General Public License as published by ! the Free Software Foundation, either version 3 of the License, or ! (at your option) any later version. ! ! This program is distributed in the hope that it will be useful, ! but WITHOUT ANY WARRANTY; without even the implied warranty of ! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ! GNU General Public License for more details. ! ! You should have received a copy of the GNU General Public License ! along with this program. If not, see <http://www.gnu.org/licenses/>. ! -----------------------------------------------------------------------------** !

Log

sensors_init.php,v

! Revision 1.1.1.1 2008/11/27 20:04:02 elphel ! ! ! Revision 1.2 2008/05/01 20:32:29 dzhimiev ! reads each sensor registers after configuration ! ! Revision 1.1 2008/04/23 01:55:49 dzhimiev ! 1. added x359 files to src lists ! 2. x359 read/write DDR ! 3. x359 3 channels mux directly to out ! 4. x359 one channel through DDR and another directly frames switching at out !

Definition at line 36 of file sensors_init.php.

References $a, $bus, $d, $i2c, $width, dev, and raw.

send_i2c_4	(	$	width,
		$	bus,
		$	a,
		$	d,
		$	raw = 0
	)

Definition at line 47 of file sensors_init.php.

References $a, $bus, $d, $i2c, dev, and raw.

sensor_init	(	$	width,
		$	bus,
		$	channel,
		$	init_pars,
		$	raw = 0
	)

Definition at line 98 of file sensors_init.php.

References $bus, $i, $init_pars, $raw, $width, receive_i2c(), and send_i2c().

---

Variable Documentation

$bus = 0

Definition at line 118 of file sensors_init.php.

$sphase = 0x0000007

Definition at line 119 of file sensors_init.php.

$width = 16

Definition at line 117 of file sensors_init.php.

---