packages/web/353/php_top/trig.php File Reference

Go to the source code of this file.

Functions
	send347 ($register_address, $d0=0)
Variables
print OK	immed
	break
case	arm
case print OK	arm
	break
case	disarm
case print OK	disarm
	break
case	single
case print OK	single
	break
case	fireall
case print OK	fireall
	break
default	__pad4__
default then disarm</li >< li >< b >	cmd

---

Function Documentation

send347	(	$	register_address,
		$	d0 = 0
	)

*************************************************************************** ! FILE NAME : trig.php ! DESCRIPTION: Controls triggering of 10347 CCD timing board ! Copyright (C) 2007 Elphel, Inc ! -----------------------------------------------------------------------------** ! ! This program is free software: you can redistribute it and/or modify ! it under the terms of the GNU General Public License as published by ! the Free Software Foundation, either version 3 of the License, or ! (at your option) any later version. ! ! This program is distributed in the hope that it will be useful, ! but WITHOUT ANY WARRANTY; without even the implied warranty of ! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ! GNU General Public License for more details. ! ! You should have received a copy of the GNU General Public License ! along with this program. If not, see <http://www.gnu.org/licenses/>. ! -----------------------------------------------------------------------------** !

Log

trig.php,v

! Revision 1.1 2007/12/06 19:02:53 elphel ! collected most of the camera PHP script into one /packages/web/353/php_top directory ! ! Revision 1.4 2007/10/31 04:59:41 elphel ! Included changes by Diego ! ! Revision 1.3 2007/10/16 20:03:06 elphel ! removed irrelevant comment ! ! Revision 1.2 2007/10/12 23:00:46 elphel ! adding power347.php to control power supplies and power timeout (supporting new FPGA interface) ! ! Revision 1.1 2007/10/11 06:43:56 elphel ! Added two small PHP scripts to controll compressor (all sensors) and trigger (CCD with 10347 board only) ! !

Definition at line 42 of file trig.php.

References $i2c, and dev.

---

Variable Documentation

default __pad4__

Definition at line 63 of file trig.php.

case print OK arm

Definition at line 52 of file trig.php.

case arm

Definition at line 52 of file trig.php.

break

Definition at line 55 of file trig.php.

break

Definition at line 54 of file trig.php.

break

Definition at line 53 of file trig.php.

break

Definition at line 52 of file trig.php.

break

Definition at line 51 of file trig.php.

default then disarm</li><li><b> cmd

Initial value:

fireall</b> - generate external trigger out pulse </li>
  </ul>
USAGE

Definition at line 64 of file trig.php.

Referenced by cris_ide_start_dma(), crisv32_eth_get_mdio_reg(), crisv32_eth_reset_tranceiver(), crisv32_eth_set_mdio_reg(), main(), parse_cmd(), PHP_FUNCTION(), and x313_JPEG_cmd_wrapper().

case print OK disarm

Definition at line 53 of file trig.php.

case disarm

Definition at line 53 of file trig.php.

case print OK fireall

Definition at line 55 of file trig.php.

case fireall

Definition at line 55 of file trig.php.

print OK immed

Definition at line 51 of file trig.php.

case print OK single

Definition at line 54 of file trig.php.

case single

Definition at line 54 of file trig.php.

---