- $ -

• $_GET : camera.php , session.php , camera.php , session.php , camera.php
• $_pass : sensor_pattern_compress.php
• $addr : senspars.php
• $address : fpga.php
• $adr : phases_adjust.php , i2c.php , phases_adjust.php , reg_write.php , tests_for_96mhz.php
• $aexp_arr : ccam.php
• $aexp_rdonly : demo_aexp.php
• $arslt : paramtool.php
• $autoexp : ccam.php
• $autoexp_get : ccam.php
• $autoexp_set : ccam.php
• $balance_pars : ccam.php , whitebalance.php
• $base_addr : usb10369a.php
• $binary_tab : focus.php
• $boards : bdetect.php
• $brand : i2c.php
• $bscale : whitebalance.php
• $bus : mem_test.php , phases_adjust.php , i2c.php , sensors_init.php , tests_for_96mhz.php , mem_read.php
• $ch1_ch2_delay : tests_for_96mhz.php
• $channel : tests_for_96mhz.php
• $circbuf : ccam.php
• $circbuf_get : ccam.php
• $CJUMP : init347.php
• $cmd : compressor.php , camogmstate2.php , i2c.php , paramtool.php , senspars.php
• $CMD : test_10369.php
• $cmd : start_gps_compass.php , camogmstate.php
• $cmd_pipe : camogmstate.php , camogmstate2.php
• $cmdfile : syncslave354.php
• $coil2_e : mshutter.php
• $coil3_e : mshutter.php
• $coil4_e : mshutter.php
• $coils_e : mshutter.php
• $compass : start_gps_compass.php
• $CONF : imconf_load.php
• $conf_file : launch.php
• $conf_rez : imconf_save.php
• $current_phase : init354.php
• $d : senspars.php
• $data : fpga.php , i2c.php , phases_adjust.php , reg_write.php , i2c.php , reg_write.php , init347.php , power347.php , senspars.php , sensor_pattern_compress.php
• $data_offset : exif.php
• $data_pointer : exif.php
• $datax : tests_for_96mhz.php
• $dcm_addr : phases_adjust.php
• $debug : session.php , camera.php
• $debug_arr : ccam.php
• $defaults : usb10369a.php
• $delay : tests_for_96mhz.php , syncslave354.php
• $dir_entries : exif.php
• $dir_sequence : exif.php
• $ELOOP : init347.php
• $error : reflash.php , honeywell_compass.php
• $exif_data : exif.php
• $Exif_file : exif.php
• $exif_get : ccam.php
• $exif_head : exif.php
• $exif_len : exif.php
• $Exif_length_offset : exif.php
• $Exif_meta_file : exif.php
• $Exif_str : exif.php
• $ExifDeviceExifFilename : exif.php
• $ExifDeviceMetadirFilename : exif.php
• $ExifDeviceMetaFilename : exif.php
• $ExifDeviceTemplateFilename : exif.php
• $ExifXMLName : exif.php
• $exit : syncslave354.php
• $file : test_inner_10369.php
• $filter : demo_focus.php , focus.php
• $flag : test_inner_10369.php
• $focus_rdonly : demo_focus.php , focus.php
• $fpga_rev : sensor_pattern_compress.php
• $fps : syncmaster354.php
• $frame_meta_size : exif.php
• $GLOBALS : mshutter.php
• $good : power347.php
• $GPS : start_gps_compass.php
• $GPSInfo_offset : exif.php
• $hist_in_thresh : ccam.php
• $hist_out_thresh : ccam.php
• $hpr_cmd : honeywell_compass.php
• $i : mshutter.php
• $i2c : init347.php
• $id : camera.php , session.php , camera.php , session.php
• $IFD_offset : exif.php
• $ifd_pointer : exif.php
• $img : init354.php
• $init : exif.php
• $init_pars : camera_demo.php , ccam.php , imconf_load.php
• $inits : imconf_load.php
• $JUMP : init347.php
• $JUMPOUT : init347.php
• $keep_pars : ccam.php
• $launch_fn : test_10369.php , test_inner_10369.php
• $lines : tests_for_96mhz.php
• $LOOP : init347.php
• $MD_LENGTH : sensor_pattern_compress.php
• $metadir : exif.php
• $minfrac : whitebalance.php
• $mode : camogmstate2.php , ccam.php
• $MODE : sensor_pattern_compress.php
• $mode : camogmstate.php
• $model : i2c.php
• $mount_point : reflash.php
• $mount_point_store : reflash.php
• $msg : focus.php , i2c.php , reflash.php , i2c.php
• $N : mem_read.php
• $n : compass_os5000.php
• $N : mem_test.php
• $n : phases_adjust.php , compass_os5000.php
• $N_shifts : mem_read.php , mem_test.php
• $NFS : reflash.php
• $NLINES : init347.php
• $nocompass : exif.php , start_gps_compass.php
• $noGPS : exif.php , start_gps_compass.php
• $nopars : i2c.php , tests_for_96mhz.php
• $nowait : focus.php
• $npars : ccam.php , camvars.php
• $NPIX : init347.php
• $number_of_daemons : backend.php
• $oper : camPipe.php
• $out : syncmaster354.php , ui_ajax.php
• $outp : paramtool.php
• $pars : ccam.php , focus.php , ccam.php
• $period : syncmaster354.php
• $pgm_name : paramtool.php
• $phase_pars : camera_demo.php
• $phase_shift : mem_test.php , phases_adjust.php , mem_read.php , tests_for_96mhz.php
• $pipe : camogmstate.php , camogmstate2.php
• $pixes : tests_for_96mhz.php
• $q : backend.php , ui_ajax.php
• $raw : mem_test.php , i2c.php , tests_for_96mhz.php , phases_adjust.php , mem_read.php
• $regs : senspars.php , init347.php , senspars.php
• $remote_script : reflash.php
• $req : backend.php
• $res : test_10369.php
• $res_fn : test_inner_10369.php , test_10369.php
• $res_xml : sensor_pattern_compress.php
• $RESET : init347.php
• $response : compass_os5000.php
• $rev : i2c.php
• $rez : imconf_save.php , launch.php
• $row_adr : mem_read.php , mem_test.php
• $rprot : i2c.php
• $rscale : whitebalance.php
• $rslt : ccam.php , i2c.php , compass_os5000.php , bdetect.php , paramtool.php , whitebalance.php , camvars.php , i2c.php
• $s : compass_os5000.php
• $scale : focus.php , demo_focus.php
• $SDRAM_PHASES_LOG : sensor_pattern_compress.php
• $self_fn : test_inner_10369.php
• $sensor_clk : sync.php
• $sensor_clock : init354.php
• $sensor_phase : init354.php
• $sensorClock : syncmaster354.php
• $seq : mshutter.php
• $seq_e : mshutter.php
• $ser_port : compass_os5000.php
• $seri : compass_os5000.php
• $serial : i2c.php
• $sero : compass_os5000.php
• $show_written : ccam.php
• $sleep : ccam.php
• $SPC_DAT_FILE : sensor_pattern_compress.php
• $sphase : tests_for_96mhz.php , sensors_init.php , phases_adjust.php
• $stage_fn : test_inner_10369.php , test_10369.php
• $stage_xml : test_inner_10369.php
• $state : mshutter.php , focus.php , mshutter.php
• $state_e : mshutter.php
• $state_template : imconf_save.php
• $status : camogmstate.php , camogmstate2.php
• $streamer_conf : ccam.php
• $streamer_get : ccam.php
• $streamer_run : ccam.php
• $SUB_IFD_offset : exif.php
• $sxml : whitebalance.php
• $T_FD : init347.php
• $T_HD : init347.php
• $T_MS : init347.php
• $T_S : init347.php
• $T_SD : init347.php
• $T_SFD : init347.php
• $T_V3D : init347.php
• $T_V3P : init347.php
• $T_V3RD : init347.php
• $T_VCCD : init347.php
• $tables_file : focus.php , demo_focus.php
• $test_fn : test_10369.php
• $TGLEXPOS : init347.php
• $TGLFD : init347.php
• $TGLFRAME : init347.php
• $TGLLINE : init347.php
• $TGLSHUTTER : init347.php
• $thrsh : whitebalance.php
• $time : i2c.php
• $timeout : ccam.php , power347.php
• $toRead : ccam.php , camvars.php
• $toWrite : camvars.php
• $trigger : syncslave354.php
• $trigger_delay : syncslave354.php
• $trigger_parms : sync.php
• $usleep : ccam.php
• $v : whitebalance.php
• $VPH0 : init347.php
• $VPH1 : init347.php
• $VPH2 : init347.php
• $VPH3 : init347.php
• $VPH4 : init347.php
• $VPH5 : init347.php
• $VPH6 : init347.php
• $VPH7 : init347.php
• $wait_time : start_gps_compass.php
• $was_running : ccam.php
• $wb_bscale : ccam.php
• $wb_minfrac : ccam.php
• $wb_rscale : ccam.php
• $wb_thrsh : ccam.php
• $wbrslt : ccam.php
• $white_balance : ccam.php
• $width : sensors_init.php , i2c.php , phases_adjust.php , tests_for_96mhz.php , mem_test.php , mem_read.php
• $wprot : i2c.php
• $xml : camvars.php , honeywell_compass.php , fpga.php , paramtool.php , compass_os5000.php , whitebalance.php , backend.php
• $xml_exif : exif.php
• $zero : i2c.php

---